Tire Pressure Monitoring System (Tpms) (Type B) (If Equipped); Tpms Reset Procedure - Kia XCeed 2020 Owner's Manual

What to do in an emergency
Tire pressure monitoring
system (TPMS) (Type B)
(if equipped)
OCDW069040
OCDW069044
• Low Tire Pressure Telltale/TPMS
Malfunction Indicator
• TPMS SET button
• Low Tire Pressure Telltale (Shown
on the LCD display)
The TPMS on this vehicle monitors
and compares the rolling radius and
rotational characteristics of each
wheel and tire while you are driving.
And it checks whether any tire is
significantly under-inflated.
7 16
Tire pressure monitoring system (TPMS)
You should reset the system by
pushing the TPMS SET button
according to the procedure and store
the current tire pressure.
After that, if one or more tires are
significantly under-inflated, the low
tire pressure indicator illuminates
and a message is shown on the
cluster.
Also, if there is a malfunction with
the TPMS, the TPMS malfunction
indicator will illuminate.

TPMS reset procedure

You should reset TPMS in below
situations.
• After repairing or replacing tires
(or wheels)
• After rotating tires
• After adjusting tire pressure
• When the low tire pressure
indicator illuminates
• After replacing suspension or ABS
system
1. Park the vehicle on a level, firm
surface.
2. Inflate the tires to the proper
pressure as indicated on the
vehicle's placard or tire inflation
pressure label located on the
driver's side center pillar outer
panel.
3. Starting the engine, press and hold
the TPMS SET button for about
three seconds to reset TPMS.
(Type B)