Kia XCeed 2020 Owner's Manual page 483

Driving your vehicle
• The Driver Attention Warning
system is not a substitute for
safe driving practices, but a
convenience function only. It is
the responsibility of the driver to
always drive cautiously to prevent
unexpected and sudden situations
from occurring. Pay attention to
the road conditions at all times.
• It may suggest a break according
to the driver's driving pattern or
habits even if the driver doesn't
feel fatigued.
• The driver, who feels fatigued,
should take a break, even though
there is no break suggestion by
the Driver Attention Warning
system.
NOTICE
The Driver Attention Warning
system utilizes the camera sensor
on the front windshield for its
operation. To keep the camera
sensor in the best condition, you
should observe the followings:
• Do not disassemble camera
temporarily for tinted window
or attaching any types of
coatings and accessories. If
you disassemble a camera and
assemble it again, take your
vehicle to an authorized Kia dealer
and have the system checked to
need a calibration.
• Do not locate any reflective
objects (i.e. white paper, mirror)
6 156
Distance 4 Distance 3 Distance 2 Distance 1
over the dashboard. Any light
reflection may cause a mal-
function of the Driver Attention
Warning (DAW) system.
• Pay extreme caution to keep the
camera sensor out of water.
• Do not arbitrarily disassemble the
camera assembly, nor apply any
impact on the camera assembly.
• Playing the vehicle audio system
at high volume may offset the
Driver Attention Warning system
warning sounds.
CAUTION
The Driver Attention Warning
system may not properly operate
with limited alerting in the following
situations:
• The lane detection performance
is limited. (For more information,
refer to "Lane Keeping Assist
(LKA) system (if equipped)" on
page 6-126.)
• The vehicle is violently driven or
is abruptly turned for obstacle
avoidance (e.g. construction area,
other vehicles, fallen objects,
bumpy road).
• Forward drivability of the vehicle is
severely undermined (possibly due
to wide variation in tire pressures,
uneven tire wear-out, toe-in/ toe-
out alignment).
• The vehicle drives on a curvy road.
• The vehicle drives on a bumpy
road.