Lka System Operation - Kia XCeed 2020 Owner's Manual

Driving your vehicle
• If you attach objects to the
steering wheel, the system may
not assist steering.
• If you attach objects to the
steering wheel, hands off alarm
may not work properly.

LKA system operation

OCDW059022
To activate/deactivate the LKA:
• With the ignition switch in
the ON position, LKA turns on
automatically. The indicator
( ) in the cluster display will
initially illuminate white. If you
press the LKA button located on
the instrument panel on the lower
left hand side of the driver, LKA
will be turned off and the indicator
on the cluster display will go off.
The color of indicator will change
depend on the condition of LKA.
• White: Sensor does not detect the
lane marker or vehicle speed is
less than 60km/h(37mph).
6 128
Distance 4 Distance 3 Distance 2 Distance 1
• Green: Sensor detects the lane
marker or road edge and system
is able to control the steering.
LKA system activation
• To see the LKA system screen on
the LCD display in the cluster, Tab
to the ASSIST mode (
• For further details, refer to "User
settings mode" on page 4-75,
[crash pad].
• After LKA system is activated, if
both lane markers or road edge
are detected, vehicle speed is
over 64km/h (40mph) and all the
activation conditions are satisfied,
a green steering wheel indicator
will illuminate and the steering
wheel will be controlled.
WARNING
The Lane Keeping Assist System is
a system to help prevent the driver
from leaving the lane or road edge.
However, the driver should not solely
rely on the system but always check
the road conditions when driving.
).