Kia XCeed 2020 Owner's Manual page 276

Features of your vehicle
complete, the orange light will
change to green.
4. You can choose to turn the
wireless charging function to
either ON or OFF by selecting the
USM on the instrument cluster.
(Please refer to "Instrument
cluster" on page 4-59).
If the wireless charging does not
work, gently move your smart
phone around the pad until the
charging indicator light turns yellow.
Depending on the smart phone, the
charging indicator light may not turn
green even after the charging is
complete.
If the wireless charging is not
functioning properly, the orange
light will blink and flash for ten
seconds then turn off. In such cases,
remove the smart phone from the
pad and replace it on the pad again,
or double check the charging status.
If you leave the smart phone on
the charging pad when the vehicle
ignition is in OFF, the vehicle will
alert you through warning messages
and sound (applicable for vehicles
with voice guidance function) after
the 'Good bye' function on the
instrument cluster ends.
CAUTION
• Securely close the tray cover
when using the wireless smart
phone charge function. Otherwise,
4 178
some liquid held by the cup holder
may flow onto the wireless
charging pad during sudden stops.
• Close the tray cover when the
smart phone is placed in it at all
times. If the vehicle is in motion
without the tray cover closed, it
is more likely that the driver may
use the smart phone. The use
of smart phones while driving
may lead to possible injuries and
accidents.
• If it is not possible to close the
tray cover due to the size of the
smart phone, do not use the
wireless smart phone charging
function at all.
• When the tray cover is broken,
do not use the wireless charging
function before the tray cover is
repaired.
• When the interior temperature
of the wireless charging system
rises above a set temperature,
the wireless charging will cease
to function. After the interior
temperature drops below the
threshold, the wireless charging
function will resume.
• If there is any metallic object
between the smart phone
and the wireless charging pad,
immediately remove the smart
phone. Remove the metallic object
after it has completely cooled
down.
• The wireless charging may not
function properly when there is
Interior features