Heated Washer Nozzle (If Equipped) - Kia XCeed 2020 Owner's Manual

Features of your vehicle
The spray and wiper operation
will continue until you release the
lever.

Heated washer nozzle (if equipped)

The heated washer nozzle function
defreeze the washer nozzles in
freezing weather.
The heated washer nozzle will turn
on and off automatically when the
ignition switch is in ON or when
the engine is running in following
conditions:
• Turns ON when the outside
temperature is below 5°C, and
OFF when it is over 10°C.
• The washer fluid defreezing speed
may be slower when the ignition is
in ON, than compared to when the
engine is running.
• When the ignition is in ON, after
20 minutes of operation, the
system will turn off automatically
to prevent possible battery
discharge.
• After the engine is running, the
washer fluid will defrost after 5 to
10 minutes.
• If the engine has been started
within the operating temperature,
the heated nozzle remains ON
even after 20 minutes.
NOTICE
In below conditions, the heated
washer nozzle may not function
properly.
• The washer fluids in the washer
reservoir is frozen.
• Outside temperature sensor is
malfunctioning.
Wipers and washers
4 135
4