Service Mode - Kia XCeed 2020 Owner's Manual

Features of your vehicle
3. Assist mode
• : This mode displays the
state of the below functions.
- Lane Keeping Assist (LKA)
- Driver Attention Warning (DAW)
- Smart Cruise Control (SCC) with
Stop & Go
- Intelligent Speed Limit Warning
(ISLW)
- Tire Pressure
• : This mode displays the state
of tire pressure.
4. User Setting mode
On this mode, you can change
settings of the doors, lamps and
so on.
5. Master warning mode
This mode informs of warning
message related to below
functions.
• Blind-Spot Collision Warning (BCW)
malfunction (if equipped)
• Blind-Spot Collision Warning (BCW)
radar blind (if equipped)
• Smart Cruise Control with Stop &
Go malfunction (if equipped)
• Smart Cruise Control with Stop &
Go radar blind (if equipped)
• Forward Collision-Avoidance Assist
malfunction (if equipped)
• Forward Collision-Avoidance Assist
radar blind (if equipped)
• High Beam Assist malfunction (if
equipped)
• Lamp malfunction
• LED head lamp malfunction (if
equipped)
4 74
Trip information (Trip computer)
• Engine oil shortage
* F or controlling the LCD modes,
refer to "LCD window control" on
page 4-62.

Service mode

Service in
It calculates and displays when
you need a scheduled maintenance
service (mileage or days).
If the remaining mileage or time
reaches 1,500 km (900 mi.) or
30 days, "Service in" message is
displayed for several seconds each
time you set the ignition switch or
ENGINE START/STOP button to the
ON position.
Service required
If you do not have your vehicle
serviced according to the already
inputted service interval, "Service
required" message is displayed
for several seconds each time you
set the ignition switch or ENGINE
START/STOP button to the ON
position.
To reset the service interval to the
mileage and days you inputted
before:
• Press the OK button (Reset) for
more than 1 second.
NOTICE