Stopping The Gasoline Engine/Diesel Engine (Manual Transmission) - Kia XCeed 2020 Owner's Manual

Driving your vehicle
button in an attempt to restart the
engine.
OCDW059002
NOTICE
• If the battery is weak or the
smart key does not work
correctly, you can start the engine
by pressing the ENGINE START/
STOP button with the smart key.
The side with the lock button
should contact the ENGINE START/
STOP button directly. When you
press the ENGINE START/STOP
button directly with the smart
key, the smart key should contact
the button at a right angle.
• When the stop lamp fuse is blown,
you cannot start the engine
normally.
Replace the fuse with a new one.
If it is not possible, you can start
the engine by pressing the engine
start/stop button for 10 seconds
while it is in the ACC position.
The engine can start without
depressing the brake pedal. But
ENGINE START/STOP button
for your safety always depress
the brake pedal and clutch pedal
(if equipped) before starting the
engine.
CAUTION
• Do not press the ENGINE START/
STOP button for more than 10
seconds except when the stop
lamp fuse is blown.
• Do not turn the ignition switch
to the START position with the
engine running. It may damage
the starter.
Stopping the gasoline engine/diesel
engine (Manual Transmission)
1. Make sure the vehicle is
completely stopped and keep
the clutch pedal and brake pedal
depressed.
2. Shift the transmission into Neutral
while depressing the clutch pedal
and brake pedal.
3. Engage the parking brake while
depressing the brake pedal.
4. Turn the ignition key to the LOCK
position and remove it.
6
6 19