Kia XCeed 2020 Owner's Manual page 183

Features of your vehicle
Electronic Power Steering (EPS)
Warning Light
This warning light illuminates:
• Once you set the ignition switch
or ENGINE START/STOP button to
the ON position.
- This indicator light comes on
after the ignition key is turned
to the ON position and then
goes out after approximately 3
seconds.
• When there is a malfunction with
the EPS.
In this case, have the vehicle
inspected by a professional
workshop. Kia recommends to
visit an authorized Kia dealer/
service partner.
Malfunction Indicator Lamp (MIL)
This warning light illuminates:
• Once you set the ignition switch
or ENGINE START/STOP button to
the ON position.
- It remains on until the engine is
started.
• When there is a malfunction with
the emission control system.
In this case, have the vehicle
inspected by a professional
workshop. Kia recommends to
visit an authorized Kia dealer/
service partner.
CAUTION
Warning and indicator lights
Malfunction Indicator Lamp (MIL)
Driving with the Malfunction
Indicator Lamp (MIL) on may
cause damage to the emission
control systems which could effect
drivability and/or fuel economy.
CAUTION
Gasoline Engine
If the Malfunction Indicator Lamp
(MIL) illuminates, potential catalytic
converter damage is possible which
could result in loss of engine power.
In this case, have the vehicle
inspected by a professional
workshop as soon as possible. Kia
recommends to visit an authorized
Kia dealer/service partner.
CAUTION
Diesel Engine
If the Malfunction Indicator Lamp
(MIL) blinks, some error related to
the injection quantity adjustment
occurs which could result in loss of
engine power, combustion noise and
poor emission.
In this case, have the engine control
system inspected by a professional
workshop. Kia recommends to visit
an authorized Kia dealer/service
partner.
4
4 85