Infotainment system
Sound
You can change the settings related
to sounds, such as location where
sound will be concentrated and the
output level for each range.
• On the control panel, press the
[SETUP/CLOCK] ▶ [2] buttons to
select Sound.
• Position: Select a location where
sound will be concentrated in the
vehicle. Select Fade or Balance,
turn the [TUNE] knob to select
the desired position, and then
press the knob. To set sound to
be centred in the vehicle, select
Centre.
• Equaliser: Adjust the output level
for each sound tone mode.
• Speed dependent volume
control: Set the volume to be
adjusted automatically according
to your driving speed.
• Rear parking sensors prioritised:
Set to decrease the audio
volume to hear a reverse
warning prior to other sounds
while reversing your vehicle.
NOTICE
• Depending on vehicle models or
specifications, available options
may vary.
• Depending on the system or
amplifier specifications applied to
your vehicle, available options may
vary.
Date/Time
You can change the date and time
that are shown on the system
display.
• On the control panel, press the
[SETUP/CLOCK] ▶ [3] buttons to
select Date/Time.
• Set date: Set date to display on
the system display.
• Set time: Set time to display on
the system display.
• Time format: Select to display
time in the 12 hour format or
the 24 hour format.
Bluetooth
You can change the settings for
Bluetooth connections.
• On the control panel, press the
[SETUP/CLOCK] ▶ [4] buttons to
select Bluetooth.
• Connections: Pair new Bluetooth
devices with your system, or
connect or disconnect a paired
device. You can also delete
paired devices.
• Auto connection priority: Select
a paired device to connect to
your system automatically when
it turns on.
• Update contacts: Download the
contacts list from the connected
mobile phone.
• Bluetooth voice guidance: Turn
on or off the voice guidance for
Bluetooth pairing, connection,
and errors.
Setup
5
5
33