Power Windows (If Equipped) - Kia XCeed 2020 Owner's Manual

Features of your vehicle

Power windows (if equipped)

The ignition switch must be in the
ON position for power windows to
operate.
Each door has a power window
switch that controls the door's
window. The driver has a power
window lock switch which can block
the operation of the rear passengers
windows. The power windows can
be operated for approximately 10
minutes after the ignition key is
removed or turned to the ACC or
LOCK position. However, if the front
doors open, the power windows
cannot be operated within the 10
minutes period after ignition key
removal. (if equipped)
If the window cannot be closed
because it is blocked by objects,
remove the objects and close the
window.
NOTICE
While driving with the rear windows
down or with the sunroof (if
equipped) in an open (or partially
open position), your vehicle may
demonstrate a wind buffeting
or pulsation noise. This noise is
a normal occurrence and can be
reduced or eliminated by taking
the following actions. If the noise
occurs with one or both of the rear
windows down, partially lower both
front windows approximately one
inch. If you experience the noise with
the sunroof open, slightly reduce the
size of the sunroof opening.
WARNING
Do not install any accessories in the
area of windows. It may impact jam
protection.
Window opening and closing
The driver's door has a master
power window switch that controls
all the windows in the vehicle.
OBDC049084RE
• To open or close a window, press
down or pull up the front portion
of the corresponding switch to the
first detent position (5).
Windows
4
4 37