Map Lamp (Bulb Type) Bulb Replacement; Map Lamp (Led Type) Bulb Replacement - Kia XCeed 2020 Owner's Manual

Maintenance
3. Remove the bulb from bulb-
socket by pulling it out.
4. Insert a new bulb by inserting it
into the bulb-socket.
5. Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assembly
and turn the socket clockwise.
6. Install the lamp assembly to the
lamp housing.
Map lamp (Bulb type) bulb
replacement
OSK3078084NR
WARNING
Prior to working on the Interior
lamps, ensure that the "OFF" button
is depressed to avoid burning your
fingers or receiving an electric shock.
1. Using a flat-blade screwdriver,
gently pry the lens cover from
lamp housing.
2. Remove the bulb by pulling it
straight out.
3. Install a new bulb in the socket.
8 110
4. Align the lens cover tabs with the
lamp housing notches and snap
the lens into place.
CAUTION
Be careful not to dirty or damage
the lens, lens tab, and plastic
housings.
Map lamp (LED type) bulb
replacement
OSK3078085NR
If the map lamp (LED) (1), does not
operate, have your vehicle checked
by a professional workshop.
Kia recommends to visit an
authorized Kia dealer/service
partner.
The LED lamp cannot be replaced
as a single unit because it is an
integrated unit. The LED lamp has to
be replaced with the unit.
A skilled technician should check or
repair the map lamp (LED), for it
Light bulbs