Kia XCeed 2020 Owner's Manual page 311

Infotainment system
system screen and confirm the
connection from the device.
4. Choose whether or not to connect
the Bluetooth device to your
system prior to other devices.
• If you grant priority to the
Bluetooth device, it will be
connected automatically to the
system when you turn on the
system.
NOTICE
• The screen image in this manual
is an example. Check your system
screen for the exact vehicle name
and Bluetooth device name.
• The default passkey is '0000'.
• It may take a while for the system
to connect with the device after
you permit the system to access
the device. When a connection is
made, the Bluetooth status icon
appears at the top of the screen.
• You can change the permission
settings via the mobile phone's
Bluetooth settings menu. For
more information, refer to your
mobile phone's user guide.
• To register a new device, repeat
steps 1 to 4.
• When a device is connected to the
system via Bluetooth, you cannot
pair another device.
• If you use the automatic
Bluetooth connection function,
a call may be switched to the
vehicle's Handsfree when you
are taking on the phone near
5 24
the vehicle while the vehicle's
engine is on. If you do not want
the system to connect with the
device automatically, deactivate
Bluetooth on your device.
• When a device is connected to the
system via Bluetooth, the device's
battery may discharge faster.
Connecting a paired device
To use a Bluetooth device on your
system, connect the paired device
to the system. Your system can
connect with only one device at a
time.
1. From the control panel, press the
[SETUP/CLOCK] button, and then
select Bluetooth ▶ Connections.
• If there is no connected device,
press the [PHONE] button on the
control panel or the Call/ Answer
button on the steering wheel.
2. Turn the [TUNE] knob to select the
device to connect, and then press
the knob.
• If another device is already
connected to your system,
disconnect it. Select the
connected device to disconnect.
3. Turn the [TUNE] knob to select
Connect, and then press the knob.
NOTICE
• If a connection ends because a
device is out of the connection
range or a device error occurs,
Bluetooth