Table of Contents
Advertisement
Features of your vehicle
detect-able by the back sensors (1)
are limited. Whenever backing-up,
pay as much attention to what is
behind you as you would in a vehicle
without a parking distance warning-
reverse.
WARNING
The parking distance warning-
reverse is a supplementary function
only. The operation of the parking
distance warning-reverse can be
affected by several factors (including
environmental conditions). It is the
responsibility of the driver to always
check the area behind the vehicle
before and while backing up.
Operation of the parking distance
warning-reverse
Operating condition
• This system will activate when
backing up with the ignition switch
ON.
If the vehicle is moving at a speed
over 5 km/h (3 mph), the system
may not be activated correctly.
• The sensing distance while the
parking distance warning-reverse
is in operation is approximately
125 cm (49 in.).
• When more than two objects are
sensed at the same time, the
closest one will be recognized first.
Parking distance warning-reverse
Types of warning sound
When an object is 125 cm to
71 cm (49 in. to 28 in.) from
the rear bumper: Buzzer
beeps intermittently.
When an object is 70 cm to
36 cm (28 in. to 14 in.) from
the rear bumper: Buzzer
beeps more frequently.
When an object is within
35 cm (14 in.) of the rear
bumper: Buzzer sounds
continuously.
* if equipped
NOTICE
The indicator may differ from the
illustration as objects or sensors
status.
If the indicator blinks, have the
system checked by a professional
workshop. Kia recommends to visit
an authorized Kia dealer/service
partner.
Non-operational conditions of
parking distance warning-reverse
The parking distance warning-
reverse may not operate properly
when:
1. Moisture is frozen to the sensor.
(It will operate normally when the
moisture has been cleared.)
2. The sensor is covered with foreign
matter, such as snow or water,
or the sensor cover is blocked. (It
Indicator*
4
4
95
Advertisement
Chapters
Table of Contents
