Using The Tire Mobility Kit - Kia XCeed 2020 Owner's Manual

What to do in an emergency
WARNING
Before using the Tire Mobility
Kit, follow the instructions on the
sealant bottle.
Remove the label with the speed
restriction from the sealant bottle
and apply it to the steering wheel.
Please note the expiry date on the
sealant bottle.

Using the Tire Mobility Kit

1. Detach the speed restriction
label (1) from the sealant bottle
(2), and place it in a highly visible
place inside the vehicle such as on
the steering wheel to remind the
driver not to drive too fast.
2. Filling the sealant Strictly follow
the specified sequence, otherwise
the sealant may escape under
high pressure.
3. Shake the sealant bottle.
OCDW069046
4. Connect the filling hose (3) onto
the connector of the sealant
bottle (A).
7 34
IF YOU HAVE A FLAT TIRE (WITH TIRE MOBILITY KIT)
5. Ensure that button (9) on the
compressor is not pressed.
6. Unscrew the valve cap from the
valve of the defective wheel
and screw filling hose (3) of the
sealant bottle onto the valve.
7. Insert the sealant bottle into the
housing of the compressor so that
the bottle is upright (B).
OCDW069005
8. Ensure that the compressor is
switched off, position 0.
OCDW069006
9. Connect between compressor and
the vehicle power outlet using the
cable and connectors.
NOTICE