Kia XCeed 2020 Owner's Manual page 39

Safety features of your vehicle
3. Press both [SET] button and the
forward movement control switch
at the same time for two seconds.
Initialization process
1. The alarm sounds and the
initialization process starts.
2. The driver seat and its seatback
automatically move backward.
The alarm continues to sound
during the movement.
3. The seat and seatback move to
the center and the alarm sounds
and the initialization is completed.
In the following cases, however,
the initialization process and the
alarming sound come to a stop.
• When Driving position memory
system button is pressed
• When the control switches for
driver's seat are pressed
• When the shift lever was displaced
from [P] to another position
• When vehicle is ran at the speed
of 3km/h or faster
• When the door on the driver's side
is closed
WARNING
• Re-start initialization if the
alarming sound or initialization
stop while the initialization is in
process.
• Make sure that nothing blocks the
place near the driver seat before
initializing Driver position memory
system.
• Once initialization is completed,
make sure to adjust the seat
to the driver's preferences and
remember the driving position.
Easy access function (if equipped)
The system will move the driver's
seat automatically as follows:
• Without smart key system
- It will move the driver's seat
rearward when the ignition key
is removed and front driver's
door is opened.
- It will move the driver's seat
forward when the ignition key is
inserted.
• With smart key system
- It will move the driver's seat
rearward when the ENGINE
START/STOP button is changed
to the OFF position and front
driver's door is opened.
- It will move the driver's seat
forward when the ENGINE
START/STOP button is changed
to the ACC or START position.
You can activate or deactivate this
feature. Refer to "User settings
mode" on page 4-75.
NOTICE
If there's not enough room between
the driver seat and the rear seat
or if the passenger is sitting right
Seats
3
3 11