Kia XCeed 2020 Owner's Manual page 68

Safety features of your vehicle
1. Route the Child Restraint
System top-tether strap over
the seatback. Placing the top
tether strap, please follow the
instructions of the Child Restraint
System manufacturer.
2. Connect the top-tether strap to
the top-tether anchorage, then
tighten the top-tether strap
according to the instructions of
your Child Restraint System's
manufacturer to firmly attach
the Child Restraint System to the
seat.
WARNING
Take the following precautions when
installing the top-tether:
• Read and follow all installation
instructions provided with your
Child Restraint System.
• NEVER attach more than one
Child Restraint System to a single
ISOFIX top-tether anchorage.
This could cause the anchorage
or attachment to come loose or
break.
• Do not attach the top-tether to
anything other than the correct
top-tether anchorage. It may
not work properly if attached to
something else.
• Child Restraint System
anchorages are designed to
withstand only those loads
imposed by correctly fitted Child
Restraint System. Under no
circumstances are they to be used
3 40
Child restraint system (CRS)
for adult seat belts or harnesses
or for attaching other items or
equipment to the vehicle.
Securing a Child Restraint System
with a lap/shoulder belt
When not using the ISOFIX system,
all Child Restraint Systems must be
secured to a rear seat with the lap
part of a lap/shoulder belt.
Installing a Child Restraint System
with a lap/shoulder belt
ODEEV058041NR
To install a Child Restraint System
on the rear seats, do the following:
1. Place the Child Restraint System
on a rear seat and route the
lap/shoulder belt around or
through the Child Restraint
System, following the Child
Restraint System manufacturer's
instructions.
2. Fasten the lap/shoulder belt latch
into the buckle. Listen for the
distinct "click" sound. Position the