Rear Turn Signal Lamp (Bulb Type) Bulb Replacement - Rear - Kia XCeed 2020 Owner's Manual

Maintenance
Rear turn signal lamp (Bulb
type) bulb replacement - Rear
combination lamp for 5 Door (type
A, B), Wagon (type A)
OCDW079053
1. Open the tailgate.
2. Open the service cover.
3. Loosen the light assembly
retaining screws with a cross-tip
screw driver.
OCDW079054
4. Remove the rear combination
lamp assembly from the body of
the vehicle.
5. Disconnect the rear combination
lamp connector.
8 100
Rear combination lamp - 5 Door (type
A, B)
OCDW079055
Rear combination lamp - Wagon (type
OCDW079093
6. Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
7. Remove the bulb from the socket
by pressing it in and rotating it
counterclockwise until the tabs on
the bulb align with the slots in the
socket.
Pull the bulb out of the socket.
Light bulbs
A)