Kia XCeed 2020 Owner's Manual page 136

Features of your vehicle
Auto up/down window (if
equipped)
OBDC049092RE
• Pressing or pulling up the power
window switch momentarily to
the second detent position (6)
completely lowers or lifts the
window even when the switch is
released.
To stop the window at the desired
position while the window is in
operation, pull up or press and
release the switch to the opposite
direction of the movement.
If the power window is not operated
correctly, the automatic power
window system must be reset as
follows:
• Turn the ignition switch to the ON
position.
• Close the window and continue
pulling up on the driver's power
window switch for at least 1
second after the window is
completely closed.
4 38
Automatic reversal
ODEEV068020NR
If the upward movement of the
window is blocked by an object or
part of the body, the window will
detect the resistance and will stop
upward movement. The window will
then lower approximately 30 cm
(11.8 in.) to allow the object to be
cleared.
If the window detects the resistance
while the power window switch is
pulled up continuously, the window
will stop upward movement then
lower approximately 2.5 cm (1 in.).
And if the power window switch is
pulled up continuously again within 5
seconds after the window is lowered
by the automatic window reversal
feature, the automatic window
reversal will not operate.
NOTICE
The automatic reverse feature for
the driver's window is only active
when the "auto up" feature is used
by fully pulling up the switch. The
automatic reverse feature will not
Windows