High Beam Operation - Kia XCeed 2020 Owner's Manual

Features of your vehicle
The ignition switch must be in
the ON position to turn on the
headlights.
Auto light position
OCDW049090
When the light switch is in the AUTO
light position, the taillights (bulb
type) and headlights will be turned
ON or OFF automatically depending
on the amount of light outside the
vehicle.
However, LED type taillight is always
on regardless of the amount of light
outside the vehicle.
CAUTION
• Never place anything over sensor
(1) located on the instrument
panel, this will ensure better auto-
light system control.
• Don't clean the sensor using a
window cleaner, the cleanser
may leave a light film which could
interfere with sensor operation.
• If your vehicle has window tint or
other types of metallic coating
on the front windshield, the
Auto light system may not work
properly.

High beam operation

OCDW049441
To turn on the high beam headlights:
• Push the lever away from you.
Pull it back for low beams.
The high beam indicator will light
when the headlight high beams
are switched on. To prevent the
battery from being discharged,
do not leave the lights on for a
prolonged time while the engine is
not running.
WARNING
Do not use high beam when there
are other vehicles. Using high beam
could obstruct the other driver's
vision.
To flash the headlights:
Lighting
4 125
4