Manual Heating And Air Conditioning - Kia XCeed 2020 Owner's Manual

Features of your vehicle
Manual heating and air
conditioning
The heating and cooling system can
be controlled manually by pushing
buttons other than the AUTO button.
In this case, the system works
sequentially according to the order
of buttons selected.
When pressing any button (or
turning any knob) except the AUTO
button while using automatic
operation, the functions not selected
will be controlled automatically.
1. Start the engine.
2. Set the mode to the desired
position.
To improve the effectiveness of
heating and cooling:
• Heating:
• Cooling:
3. Set the temperature control to
the desired position.
4. Set the fan speed control to the
desired speed.
5. If air conditioning is desired, turn
the air conditioning system on.
Press the AUTO button in order to
convert to full automatic control of
the system.
Mode selection
The mode selection button controls
the direction of the air flow through
the ventilation system.
4 152
Automatic climate control system
OCDW049327
Mode selection button
You can select various modes using
the face, floor and/or defrost mode
button.
If you push the button once, the
corresponding switch will turn on,
and if you push the button again, the
switch will turn off.
Face-Level (B, D)
Air flow is directed toward the upper
body and face. Additionally, each
outlet can be controlled to direct the
air discharged from the outlet.
Floor-Level (C, E, A, D)
Most of the air flow is directed to
the floor.
Floor/Defrost-Level (A, C, D,
E)
Most of the air flow is directed to
the floor and the windshield with a