Lfa System Operation - Kia XCeed 2020 Owner's Manual

Driving your vehicle
• Be sure to check the nonoperating
conditions and cautions for
the driver before using the LFA
system.
• Do not place reflective materials
such as white paper or mirror on
the crash pad. Sunlight reflections
can cause a malfunction in the LFA
system.
• Too high volume from the sound
system can interrupt the alarming
sound from the LFA system.
• Keeping your hands off the wheel
while driving will trigger the
hands-off warning and deactivate
the steering-assist system. Put
your hands back on the wheel,
then the steering-assist system
will be reactivated.
• When driving at a high speed, the
steering assist force can become
weak and the vehicle can drive
out of its lane. Extra caution is
required, and comply with the
speed limit.
• Attaching an object to the steering
wheel could deter steering
assistance.
• Attaching an object to the steering
wheel could deter the handsoff
alarming system.

LFA system operation

To use the Lane Following Assist two
steps are necessary:
Distance 4 Distance 3 Distance 2 Distance 1
1. the LFA System has to be enabled,
and
2. the SCC Function has to be
activated
With the ignition [ON], select or
release the setting from "User
setting → Driver assistance →
Driving assist → LFA (Lane Following
Assist)".
Select the LFA system in the user
setting of the instrument panel.
The LFA system status is
remembered by the system and
therefore does not need to be
enabled again for each new journey.
OCDW059158
1. Press the CRUISE button, to
turn the system on. The CRUISE
indicator in the instrument cluster
will illuminate.
2. Accelerate to the desired speed.
The smart cruise control speed
can be set as follows:
• 10 km/h (5mph) ~ 180 km/h
(110 mph): when there is no
vehicle in front
6 121
6