Limitation Of The System - Kia XCeed 2020 Owner's Manual

Table of Contents

Advertisement

Driving your vehicle

Limitation of the system

The FCA is an assistant system for
a driver in a certain risky driving
condition and it does not take every
responsibility for all risks from
driving condition.
The FCA monitors the driving
situations through the camera
sensor. Thus, for a situation out of
the sensing range, the FCA may not
normally operate. The driver should
pay great caution in the following
situations. The FCA operation may
be limited.
Recognizing vehicles
• The camera is contaminated with
foreign substances.
• It heavily rains or snows.
• There is interruption by electric
waves.
• The vehicle in front has a narrow
body. (i.e. motor cycle and bicycle)
• The driver's view is unclear due to
the backlight, the reflected light,
or darkness.
• The camera cannot contain the
full image of the vehicle in front.
• The vehicle in front is a special
vehicle, such as a heavily-loaded
truck or a trailer.
• The outside brightness is greatly
changed, such as entering/exiting
the tunnel.
• The vehicle driving is unstable.
• The camera sensor recognition is
limited.
Forward collision-avoidance assist (FCA)
• The driver's field of view is not
well illuminated (either too dark or
too much reflection or too much
backlight that obscures the field
of view)
• The vehicle in front is driving
erratically
• The vehicle is driven near areas
containing metal substances such
as a construction zone, railroad,
etc.
• Backlight is reflected in the
direction of the vehicle (including
front light from the vehicle ahead)
• Moisture on the windshield is not
completely removed or frozen.
• The weather is misty.
• The vehicle in front does not turn
ON the rear lights, does not have
rear lights, has asymmetric rear
lights, or has rear lights out of
angle.
• The vehicle is on unpaved or
uneven rough surfaces, or roads
with sudden gradient changes.
• The vehicle is moving under
ground level or inside a building.
• If a sudden change in the sensor
recognition takes place while
passing through the speed bump,
• When the vehicle is severely
shaken,
• When driving around circular
intersection after the vehicle in
front,
• If the front of the camera lens
is contaminated by front glass
tinting, film, water repellent
(Camera type)
6
6
69

Advertisement

Table of Contents
loading

Table of Contents