High Beam Assist (If Equipped) - Kia XCeed 2020 Owner's Manual

Features of your vehicle
• Pull the lever towards you. It will
return to the normal (low beam)
position when released.
OCDW049443
The headlight switch does not
need to be on to use this flashing
feature.

High Beam Assist (if equipped)

The High Beam Assist is a system
that automatically adjusts the
headlamp range (switches between
high beam and low beam) according
to the brightness of other vehicles
and road conditions.
OCDW049437
4 126
Operating condition
1. Place the light switch in the AUTO
position.
2. Turn on the high beam by pushing
the lever away from you.
The High Beam Assist (
indicator will illuminate.
3. The High Beam Assist will turn on
when vehicle speed is above 45kph
(28mph).
• If the lever is pushed away
when the High Beam Assist is
operating, the High Beam Assist
will turn off and the high beam
will be on continuously. The High
Beam Assist (
turn off.
• If the lever is pulled towards you
when the high beam is on with
operating High Beam Assist, the
High Beam Assist will turn off.
4. If the light switch is placed to the
headlamp position, the High Beam
Assist will turn off and the low
beam will be on continuously.
The high beam switches to low
beam in the below conditions.
• When the High Beam Assist is off.
• When the light switch is not in the
AUTO position.
• When the headlamp is detected
from the on-coming vehicle.
• When the tail lamp is detected
from the front vehicle.
• When the surrounding is bright
enough high beams are not
needed.
Lighting
)
) indicator will