Operating Turn Signals And Lane Change Signals - Kia Seltos Manual

Features of your vehicle
The headlight switch does not
need to be on to use this flashing
feature.
Operating turn signals and lane
change signals
Type A
OSP2049078L
Type B
OSP2049452R
The ENGINE START/STOP button
must be on for the turn signals to
function.
To turn on the turn signals:
Move the lever up or down (A).
The green arrow indicators on the
instrument panel indicate which
turn signal is operating.
They will self-cancel after a turn
is completed. If the indicator con -
tinues to flash after a turn, man -
ually return the lever to the OFF
position.
To signal a lane change:
Move the turn signal lever slightly
and hold it in position (B).
The lever will return to the OFF
position when released.
If an indicator stays on and does not
flash or if it flashes abnormally, one
of the turn signal bulbs may be
burned out and will require replace -
ment.
One-touch lane change function
To activate a one-touch lane change
function, move the turn signal lever
slightly and then release it. The lane
change signals will blink 3, 5 or 7
times.
You can activate or deactivate the
One Touch Turn Signal function or
choose the number of blinking (3, 5,
or 7) by selecting "User settings →
Lights → One touch turn indicator".
NOTICE
If an indicator flash is abnormally
quick or slow, a bulb may be burned
out or have a poor electrical connec -
tion in the circuit.
Lighting
4
4 99