Default Setting Configurations
3
Selecting Setup Mode
Press and hold SET key and power-on the instrument from OFF status. Release
SET key when you hear a beep, the instrument will then enter setup mode. These
parameters will be remained in the non- volatile memory even after the
instrument is turned off. To configure the related parameters on setup mode,
ensure that the following procedures are followed:
1 Press
(Left) or
(Right) key to select which menu item to be set.
2 Press
(Up) or
(Down) key to change the parameter.
3 Press SET key to select the digit to be adjusted, the selected digit will flash.
4 Press and hold SET key for more than 1 s to save your setting.
5 Press SET key for more than 1 s to exit setup mode.
Keysight U1701B User's and Service Guide
43