Enable And Verify A Dimm - Oracle SPARC T7-2 Service Manual

Enable and Verify a DIMM

Tighten the screw six turns to secure.
4. Return the server to operation.
See "Returning the Server to Operation" on page
Related Information
"Memory Riser and DIMM Configuration" on page 91
■
"Remove a DIMM" on page 102
■
"Enable and Verify a DIMM" on page 108
■
Enable and Verify a DIMM
1.
At the Oracle ILOM prompt type show faulty.
If the output indicates a POST-detected fault, go to step 2.
■
108 SPARC T7-2 Server Service Manual • July 2019
171.