X 2.5-Inch Rear Drive Module - Huawei TaiShan 200 2280 Maintenance And Service Manual

TaiShan 200 Server
Maintenance and Service Guide (Model 2280)
Step 9 Connect cables to the drive module. For details, see
Step 10 Install the chassis cover. For details, see
Step 11 Install the server. For details, see
Step 12 Connect the power cables. For details, see
Step 13 Power on the server. For details, see
Step 14 Log in to the iBMC WebUI, and check whether the new component is normal. For
details, see the
----End

5.19.2 4 x 2.5-inch Rear Drive Module

Removing a Rear Drive Module
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Power off the server. For details, see
Step 3 Remove the power cables. For details, see
Step 4 Remove the server. For details, see
Step 5 Remove the chassis cover. For details, see
Step 6 Remove all cables from the rear drive module. For details, see
Step 7 Determine the positions of the drives in the rear drive module. See
Remove all drives from the rear drive module.
Figure 5-86 Positions of drives
Step 8 Loosen the screws that secure the rear drive assembly. See (1) in
Issue 04 (2020-01-16)
TaiShan Rack Server iBMC User Guide
Copyright © Huawei Technologies Co., Ltd.
3 Internal
5.8 Chassis Cover.
5.4.3 Installing the Server on Guide
5.7 PSU.
5.4.1 Powering On the
5.2 ESD Protection.
5.4.2 Powering Off the
5.7 PSU.
5.4.4 Removing the Server and Guide
5.8 Chassis
5 Removal and Installation
Cabling.
Rails.
Server.
.
Server.
Cover.
3 Internal Cabling.
Figure
Figure 5-87.
Rails.
5-86.
145