Table of Contents
Advertisement
TaiShan 200 Server
Maintenance and Service Guide (Model 2280)
Step 3 Remove the power cables. For details, see
Step 4 Remove the server. For details, see
Step 5 Remove the chassis cover. For details, see
Step 6 Remove the drive module or riser module above the battery. For details about
how to remove a drive module, see
details about how to remove a riser module, see
Step 7 Pull up the right end of the battery and remove it from the slot. See
Figure 5-59 Removing the battery
Step 8 Place the removed battery in an ESD bag.
----End
Installing the Battery
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Power off the server. For details, see
Step 3 Remove the power cables. For details, see
Step 4 Remove the server. For details, see
Step 5 Remove the chassis cover. For details, see
Step 6 Remove the drive module or riser module above the battery. For details about
how to remove a drive module, see
details about how to remove a riser module, see
Issue 04 (2020-01-16)
Copyright © Huawei Technologies Co., Ltd.
5.7
PSU.
5.4.4 Removing the Server and Guide
5.8 Chassis
Cover.
5.19.1 2 x 3.5-inch Rear Drive
5.11 Riser
5.2 ESD
Protection.
5.4.2 Powering Off the
5.7
PSU.
5.4.4 Removing the Server and Guide
5.8 Chassis
Cover.
5.19.1 2 x 3.5-inch Rear Drive
5.11 Riser
5 Removal and Installation
Rails.
Module. For
Module.
Figure
5-59.
Server.
Rails.
Module. For
Module.
122
Advertisement
Table of Contents
