X 3.5-Inch Rear Drive Module - Huawei TaiShan 200 2280 Maintenance And Service Manual

TaiShan 200 Server
Maintenance and Service Guide (Model 2280)

5.19.1 2 x 3.5-inch Rear Drive Module

Removing a Rear Drive Module
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Power off the server. For details, see
Step 3 Remove the power cables. For details, see
Step 4 Remove the server. For details, see
Step 5 Remove the chassis cover. For details, see
Step 6 Remove all cables from the rear drive module. For details, see
Step 7 Determine the positions of the drives in the rear drive module. See
Remove all drives from the rear drive module.
Figure 5-82 Positions of drives
Step 8 Loosen the screws that secure the rear drive assembly. See (1) in
Issue 04 (2020-01-16)
The procedure for removing rear drive assembly 1 is the same as that for removing rear
drive assembly 2. The following figure uses rear drive assembly 1 as an example.
Copyright © Huawei Technologies Co., Ltd.
5.2 ESD Protection.
5.4.2 Powering Off the
5.7 PSU.
5.4.4 Removing the Server and Guide
5.8 Chassis Cover.
5 Removal and Installation
Server.
Rails.
3 Internal Cabling.
Figure 5-82.
Figure 5-83.
142