Table of Contents
Advertisement
TaiShan 200 Server
Maintenance and Service Guide (Model 2280)
Removing a Fan Module
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Power off the server. For details, see
Step 3 Remove the power cables. For details, see
Step 4 Remove the server. For details, see
Step 5 Remove the chassis cover. For details, see
Step 6 Press the latches on both sides of the fan module to unlock it. See (1)
5-39.
Figure 5-39 Removing a fan module
Step 7 Lift the fan module slowly until it is completely out of the slot. See (2) in
5-39.
Issue 04 (2020-01-16)
● You can skip steps
Step 2
removing the server. The scenarios include but are not limited to: (1) the server is
installed on adjustable guide rails and (2) the server is not installed in a cabinet.
● To maintain a proper cooling effect during system operation, remove only one fan at a
time.
Copyright © Huawei Technologies Co., Ltd.
5.2 ESD
Protection.
to
Step 4
when you can open the chassis cover without
5.4.2 Powering Off the
5.7
PSU.
5.4.4 Removing the Server and Guide
5.8 Chassis
5 Removal and Installation
Server.
Cover.
Figure
Figure
Rails.
107
Advertisement
Table of Contents
