Table of Contents
Advertisement
TaiShan 200 Server
Maintenance and Service Guide (Model 2280)
Figure 5-87 Removing a rear drive assembly
Step 9 Lift the rear drive assembly. See (2) in
Step 10 Place the removed drive assembly in an ESD bag.
----End
Installing a Rear Drive Module
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Power off the server. For details, see
Step 3 Remove the power cables. For details, see
Step 4 Remove the server. For details, see
Step 5 Remove the chassis cover. For details, see
Step 6 Take a spare drive assembly out of its ESD bag.
Step 7 Install the rear drive assembly in the chassis and tighten the screws. See
5-88.
Issue 04 (2020-01-16)
Copyright © Huawei Technologies Co., Ltd.
Figure
5-87.
5.2 ESD
Protection.
5.4.2 Powering Off the
5.7
PSU.
5.4.4 Removing the Server and Guide
5.8 Chassis
Cover.
5 Removal and Installation
Server.
Rails.
Figure
146
Advertisement
Table of Contents
