TaiShan 200 Server
Maintenance and Service Guide (Model 2280)
Step 10 Connect the power cables. For details, see
Step 11 Power on the server. For details, see
Step 12 Power on the server and check that the indicator on the left mounting ear
indicates no fault. For details about the indicator location and status, see
Front Panel Indicators and
----End
5.21 Right Mounting Ear Plate
Removing the Right Mounting Ear Plate
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Power off the server. For details, see
Step 3 Remove the power cables. For details, see
Step 4 Remove the server. For details, see
Step 5 Use a flat-head screwdriver to pry up the right mounting ear, hold the right
mounting ear, and gently pull it out. See (1) and (2) in
Issue 04 (2020-01-16)
Buttons.
Copyright © Huawei Technologies Co., Ltd.
5.7
PSU.
5.4.1 Powering On the
5.2 ESD
Protection.
5.4.2 Powering Off the
5.7
PSU.
5.4.4 Removing the Server and Guide
5 Removal and Installation
Server.
2.2
Server.
Rails.
Figure
5-92.
150