Huawei TaiShan 200 2280 Maintenance And Service Manual page 140

TaiShan 200 Server
Maintenance and Service Guide (Model 2280)
Figure 5-71 Removing a DIMM
Step 8 Remove the DIMM from the slot. See (2) in
Step 9 Place the removed DIMM in the DIMM box.
----End
Installing a DIMM
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Power off the server. For details, see
Step 3 Remove the power cables. For details, see
Step 4 Remove the server. For details, see
Step 5 Remove the chassis cover. For details, see
Step 6 Remove the air duct. For details, see
Step 7 Take a spare DIMM out of the DIMM box.
Step 8 Open the two fixing clips of the DIMM slot. See
Figure 5-72 Opening the fixing clips on the DIMM slot
Step 9 Align the DIMM with the DIMM slot, and insert the DIMM into the slot. See
Figure
The two retaining clips pop up into place automatically.
Issue 04 (2020-01-16)
5-73.
Copyright © Huawei Technologies Co., Ltd.
Figure 5-71.
5.2 ESD Protection.
5.4.2 Powering Off the
5.7 PSU.
5.4.4 Removing the Server and Guide
5.8 Chassis Cover.
5.9 Air Duct.
Figure
5 Removal and Installation
Server.
Rails.
5-72.
133