Huawei TaiShan 200 2280 Maintenance And Service Manual page 16

TaiShan 200 Server
Maintenance and Service Guide (Model 2280)
Table 2-3 Indicators and buttons on the front panel
Silkscr
een
Issue 04 (2020-01-16)
Figure 2-9 Indicators and buttons on the front panel of a server 24 x 2.5 SAS/
SATA pass-through drives
1 UID button/indicator
3 Power button/indicator
5 FlexIO presence indicators (1
and 2)
Servers with Kunpeng 920 5220 or 3210 processors do not support the configuration
of 24 x 2.5-inch SAS/SATA pass-through drives.
Indicator/ State Description
Button
Fault ● ---: The server is operating normally.
diagnostic
● Error code: A server component is faulty.
LED
For details about error code, see the
Server iBMC Alarm Handling
Power Power indicator
button/
● Steady yellow: The server is in the standby state.
indicator
● Steady green: The server is properly powered on.
● Blinking yellow: The iBMC is starting.
● Off: The server is not connected to a power source.
Power indicator
● When the server is powered on, you can press this
● When the server is powered on, you can hold down
● When the server is in the standby state, you can press
Copyright © Huawei Technologies Co., Ltd.
2
4
-
button to shut down the OS.
this button for 6 seconds to force the server to power
off.
this button to start the server.
2 Components
Health indicator
Fault diagnostic LED
-
TaiShan Rack
.
9