Huawei TaiShan 200 2280 Maintenance And Service Manual page 156

TaiShan 200 Server
Maintenance and Service Guide (Model 2280)
Step 7 Remove the signal cable from the left mounting ear plate.
Step 8 Place the removed left mounting ear plate in an ESD bag.
----End
Installing the Left Mounting Ear Plate
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Power off the server. For details, see
Step 3 Remove the power cables. For details, see
Step 4 Remove the server. For details, see
Step 5 Take a spare left mounting ear out of its ESD bag.
Step 6 Install the left mounting ear plate. See (1) in
Figure 5-91 Installing the left mounting ear plate
Step 7 Connect the signal cable to the left mounting ear plate.
Step 8 Install the left mounting ear. See (2) in
Step 9 Install the server. For details, see
Issue 04 (2020-01-16) Copyright © Huawei Technologies Co., Ltd.
5.2 ESD Protection.
5.4.2 Powering Off the
5.7 PSU.
5.4.4 Removing the Server and Guide
Figure 5-91.
Figure 5-91.
5.4.3 Installing the Server on Guide
5 Removal and Installation
Server.
Rails.
Rails.
149