Rear Drive Module - Huawei TaiShan 200 2280 Maintenance And Service Manual

TaiShan 200 Server
Maintenance and Service Guide (Model 2280)
Step 4 Connect cables to the front drive backplane. For details, see
Step 5 Install all fan module brackets in the chassis. See
Figure 5-81 Installing a fan module bracket
Step 6 Install the fan modules. For details, see
Step 7 Install front drives. For details, see
Step 8 Install the air duct. For details, see
Step 9 Install the chassis cover. For details, see
Step 10 Install the server. For details, see
Step 11 Connect the power cables. For details, see
Step 12 Power on the server. For details, see
Step 13 Log in to the iBMC WebUI, and check whether the new component is normal. For
details, see the
----End

5.19 Rear Drive Module

This section uses the server with Kunpeng 920 7260, 5250, or 5230 processors as
an example to describe the internal structure of a server. The procedures for
removing and installing the rear drive module are the same for the server
configured with Kunpeng 920 5220 or 3210 processors.
Issue 04 (2020-01-16)
TaiShan Rack Server iBMC User Guide
NO TICE
Copyright © Huawei Technologies Co., Ltd.
Figure
5.10 Fan Module.
5.6 Drive.
5.9 Air Duct.
5.8 Chassis Cover.
5.4.3 Installing the Server on Guide
5.7 PSU.
5.4.1 Powering On the
5 Removal and Installation
3 Internal Cabling.
5-81.
Rails.
Server.
.
141