Table of Contents
Advertisement
TaiShan 200 Server
Maintenance and Service Guide (Model 2280)
Figure 5-92 Removing the right mounting ear plate
Step 6 Take out the right mounting ear plate. See (3) in
Step 7 Remove the signal cable from the right mounting ear plate.
Step 8 Place the removed right mounting ear plate in an ESD bag.
----End
Installing the Right Mounting Ear Plate
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Power off the server. For details, see
Step 3 Remove the power cables. For details, see
Step 4 Remove the server. For details, see
Step 5 Take a spare right mounting ear out of its ESD bag.
Step 6 Connect the signal cable to the right mounting ear.
Issue 04 (2020-01-16)
Copyright © Huawei Technologies Co., Ltd.
Figure
5.2 ESD
Protection.
5.4.2 Powering Off the
5.7
PSU.
5.4.4 Removing the Server and Guide
5 Removal and Installation
5-92.
Server.
Rails.
151
Advertisement
Table of Contents
