Table of Contents
Advertisement
TaiShan 200 Server
Maintenance and Service Guide (Model 2280)
Rear Drive Backplane Cabling for a Server with I/O Module 1
Figure 3-13 Rear drive backplane cabling
Table 3-13 Rear drive backplane cabling
No.
1
2
3
Issue 04 (2020-01-16)
Connectors and Cable
Power cable for connecting the mainboard (J10) to
the drive backplane for I/O module 1 (J1)
Low-speed signal cable for connecting the front
drive backplane (J32) to the drive backplane for I/O
module 1 (J5)
SAS cable for connecting the front drive backplane
(J31) to the drive backplane for I/O module 1 (J2)
NOTE
This cable is a 1-to-2 cable. One end of the cable is
connected to the front drive backplane, and the other end
with two connectors is connected to the rear drive
backplane. The cable must be routed along the PSU side in
the chassis. The cable length limit prevents cable
connection errors on the rear drive backplane.
Copyright © Huawei Technologies Co., Ltd.
3 Internal Cabling
Part No.
04150448-00
1
04052349
04051934-00
1
53
Advertisement
Table of Contents
