Dimm - Huawei TaiShan 200 2280 Maintenance And Service Manual

TaiShan 200 Server
Maintenance and Service Guide (Model 2280)
Step 9 Connect the cable of the supercapacitor to the RAID controller card. See
5-70.
Figure 5-70 Connecting the supercapacitor cable
Step 10 Install the chassis cover. For details, see
Step 11 Install the server. For details, see
Step 12 Connect the power cables. For details, see
Step 13 Power on the server. For details, see
Step 14 Log in to the iBMC WebUI, and check whether the new component is normal. For
details, see the
----End

5.16 DIMM

Removing a DIMM
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Power off the server. For details, see
Step 3 Remove the power cables. For details, see
Step 4 Remove the server. For details, see
Step 5 Remove the chassis cover. For details, see
Step 6 Remove the air duct. For details, see
Step 7 Simultaneously press the ejectors outwards. See (1) in
Issue 04 (2020-01-16)
TaiShan Rack Server iBMC User Guide
Copyright © Huawei Technologies Co., Ltd.
5.8 Chassis Cover.
5.4.3 Installing the Server on Guide
5.7 PSU.
5.4.1 Powering On the
5.2 ESD Protection.
5.4.2 Powering Off the
5.7 PSU.
5.4.4 Removing the Server and Guide
5.8 Chassis
5.9 Air Duct.
5 Removal and Installation
Figure
Rails.
Server.
.
Server.
Cover.
Figure 5-71.
Rails.
132