Psu; Ac Psu - Huawei TaiShan 200 2280 Maintenance And Service Manual

TaiShan 200 Server
Maintenance and Service Guide (Model 2280)
Figure 5-18 Installing a drive
Step 6 Ensure that the ejector lever is fastened to the chassis beam, and then close it to
completely insert the drive into the chassis. See (2) in
Step 7 If the server is equipped with a front bezel, install the bezel after installing the
front drives. For details, see
Step 8 After the drive is installed, if you need to restore the data on the new drive, see
Troubleshooting > Hard Drive Fault for the corresponding RAID controller card in
the
Step 9 Log in to the iBMC WebUI, and check whether the new component is normal. For
details, see the
----End

5.7 PSU

5.7.1 AC PSU

Removing an AC PSU
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Determine the rack number and chassis number of the server to be removed, and
label its panel to prevent misoperations.
Step 3 (Optional) Power off the server. For details, see
Issue 04 (2020-01-16)
TaiShan Server RAID Controller Card User Guide
TaiShan Rack Server iBMC User Guide
Copyright © Huawei Technologies Co., Ltd.
5.5 (Optional) Front
5.2 ESD
5.4.2 Powering Off the
5 Removal and Installation
Figure 5-18.
Bezel.
.
.
Protection.
Server.
91