Rear Panel Components - Huawei TaiShan X6000 User Manual

TaiShan X6000 Server
User Guide
No.
9
10
11

2.3 Rear Panel Components

The X6000 contains four server nodes and two PSUs at the rear. Each node
supports a maximum of two PCIe cards.
Figure 2-4
nodes.
Figure 2-4 X6000 rear panel
1
3
5
Issue 04 (2020-06-05)
Silks Name
cree
n
Server node
4 health
indicator
- Aggregation
network port
activity
indicator
- Aggregation
network port
link status
indicator
shows the rear panel of the X6000 fully configured with 2U4 server
Server node 3
UCP of a server node
10GE optical port
Copyright © Huawei Technologies Co., Ltd.
Description
● Off: There is no power supply, or the PSU is
faulty.
● Blinking red at 1 Hz: A major alarm has been
generated on the server node.
● Blinking red at 5 Hz: A critical alarm has been
generated on the server node.
● Steady green: The server node is operating
properly.
● Off: No data is being transmitted through the
network port.
● Blinking orange: Data is being transmitted
through the network port.
● Off: The network port is not connected.
● Steady green: The network port has been
properly connected.
2
4
6
2 Components
Server node 1
Standard PCIe card/RAID
controller card slot
GE port
8