Table of Contents
Advertisement
TaiShan 200 Server
Maintenance and Service Guide (Model 2280)
Step 7 Take a spare battery out of its ESD bag.
Step 8 Hold the battery with the side marked with text facing upwards, insert the left end
of the battery into the slot, and gently press down the battery until it is properly
installed in the slot. See
Figure 5-60 Installing the battery
Step 9 Install the drive module or riser module above the battery. For details about how
to install a drive module, see
about how to install a riser module, see
Step 10 Install the chassis cover. For details, see
Step 11 Install the server. For details, see
Step 12 Connect the power cables. For details, see
Step 13 Power on the server. For details, see
----End
Issue 04 (2020-01-16)
Figure
5-60.
5.19.1 2 x 3.5-inch Rear Drive
Copyright © Huawei Technologies Co., Ltd.
5.11 Riser
Module.
5.8 Chassis
Cover.
5.4.3 Installing the Server on Guide
5.7
PSU.
5.4.1 Powering On the
5 Removal and Installation
Module. For details
Rails.
Server.
123
Advertisement
Table of Contents
