Control Panel - Otto Bock Skippi Plus Instructions For Use Manual

Operation
NOTICE
Risk of damage to other devices. The power wheelchair
may generate electromagnetic fields that can cause inter-
ference with other devices. Therefore, switch the controls
off whenever you don't need them.

6.3.1 Control panel

The power wheelchair is operated using the control panel.
The control panel consists of a keypad, LCD display and
joystick. The charging/programming receptacle and two in-
puts for external push-buttons are located on the underside.
The power wheelchair is turned on and off using the keypad;
driving commands can be entered and the status of certain
functions and components can be displayed.
50 Ottobock
|
5
4
3
2
1
Fig. 30 Control panel
1 Joystick
2 Direction indicator, left
3 Warning flasher
4 LCD display
5 On/Off button
6 Mode button
Pressing the mode key briefly increases the speed level. Af-
ter reaching the maximum speed level, you can change
back to speed level 1 by pressing the button again (1-2-3-4-
5-1-...). Pushing and holding the button for at least 2 sec-
onds switches the control unit to the "Electric seat function"
menu.
6
7
8
12
9
7 Horn
8 Direction indicator, right
9 Light
10 Charging / programming receptacle
11 Connector for external On/Off button
12 Connector for external mode button
Skippi Plus
10
11