Transportation and storage
Fig. 5 b
Rear eyebolts
5.1.1 Required accessories
To use the power wheelchair as a seat in a vehicle for trans-
porting persons with reduced mobility, additional accesso-
ries have to be mounted (Skippi without seat height adjust-
ment: 491S00=SK024 fixation kit; Skippi with seat height
adjustment: 491S00=SK005 fixation kit).
The qualified personnel which fit the wheelchair can provide
more information.
5.1.2 Using the product in the vehicle
The power wheelchair has been tested according to ANSI/
RESNA and ISO 7176-19.
32
Ottobock
|
Securing the product in the wheelchair accessible vehi-
cle
1. Position the power wheelchair in the wheelchair accessi-
ble vehicle. For further information see section 5 in the
brochure "Using your product for transportation in a
wheelchair accessible vehicle", order number 646D158.
2. Turn the control unit off (see section 6.3.2).
3. Verify brake locking. Engage the brake when needed
(see section 6.4).
4. Engage the attachment straps at the front and rear be-
fore tightening them (fig. 5 c).
Fig. 5 c
Engaged attachment straps at the front and rear
Skippi Plus