Fig. 49
Putting the lap belt on
Opening the lap belt
1. Press the release button.
2. Open the belt buckle and lay the belt to the side.
Cleaning the belt system
INFORMATION
Observe the washing recommendations on the product
and the information in the corresponding instructions for
use provided for the product.
Belts with metal snaps may not be washed in washing
machines as the penetration of water could cause cor-
rosion and subsequent malfunctions.
Skippi Plus
Clean the belt straps by gently dabbing them with warm
soapy water (with some disinfectant) or carefully wiped
with a dry, clean, absorbent cloth.
Additional cleaning instructions
Allow the belts to air dry. Ensure that the belts and pads
are completely dry before installation.
Do not expose the belts to direct heat (e.g. sunshine,
stove or radiator).
Do not iron or bleach the belts.
7.6
Lights
The power wheelchair can be equipped with a light kit.
The warning flashers, the right and left direction indicators
and the light are operated via the control panel.
The light kit consists of two rear lights with integrated direc-
tion indicators and two front lights, each consisting of a front
LED light and a direction indicator.
The front lights are fastened to the self-contacting side pan-
els (see fig. 51, left). When the side panels are inserted into
the side panel holders the contacts touch each other and
current can flow (see fig. 51, right).
To replace broken lamps, see the section "Replacing a de-
fective bulb".
Accessories
Ottobock | 85