Warning; Fault - Otto Bock Skippi Plus Instructions For Use Manual

Malfunctions/troubleshooting
8.1

Warning

A warning indicates a status or malfunction of one or sever-
al components of the power wheelchair. The function of
components that have no errors is not restricted. For exam-
ple, if the connection between the controller and seat motor
malfunctions, this error will only be indicated if the user at-
tempts to activate the motor. However, the driving function is
still available.
8.2

Fault

CAUTION
Risk of injury if the power wheelchair stops abruptly. In
case of communication problems in the control unit bus
system, the system triggers an emergency stop in order to
prevent any uncontrolled functions.
Depending on the source of the malfunction, it may be pos-
sible to drive the wheelchair out of a danger zone such as
road traffic after switching the control unit on again.
If the driving function is still not available after switching
the control unit on again, the brake can be deactivated
(see section 6.4) to switch over to pushing mode. Contact
a specialist dealer immediately after an emergency stop!
88 Ottobock
|
CAUTION
Risk of accidents due to uncontrolled driving behaviour.
Uncontrolled movements can occur during operation of the
power wheelchair as a result of malfunctions. Please con-
tact your authorised specialist dealer immediately if this
occurs.
A fault impairs one or several functions of the power wheel-
chair. The system is not fully operational until the fault has
been corrected.
Skippi Plus