Batteries - Otto Bock Skippi Plus Instructions For Use Manual

Operation
In this position, the control unit will recognise that the brake
has been disengaged and will automatically deactivate the
driving function. A warning will appear on the LCD display
as soon as the joystick is deflected:
Display symbol
Tab. 4 Control panel display when the brake is disengaged
INFORMATION
If the control unit does not indicate an error on the control
panel when the brake lever is disengaged, this indicates a
malfunction which must be corrected by the specialist
dealer promptly.
INFORMATION
All braking systems are deactivated once the brake re-
lease lever has been disengaged.
INFORMATION
The control unit may be switched off in push mode.
62 Ottobock
|
Information
Brake is disengaged
Engaging/activating the brake
To engage the brake, push the red brake release lever in
(fig. 32).
The control unit activates the driving function again when
both brake release levers are engaged.
6.5

Batteries

NOTICE
Risk of damage to the battery packs. The batteries are
encapsulated in battery packs at the factory. The battery
packs may not be opened, since this could cause irrevers-
ible damage to the encapsulated batteries or the battery
pack.
INFORMATION
Checking the remaining battery capacity and charging the
battery in time are essential in order to ensure the opera-
tional safety of your power wheelchair.
INFORMATION
Before doing any maintenance work on the batteries,
please read the warnings thoroughly. Observe the dispos-
al information (see section 10).
Skippi Plus