Fault Indication: Attendant Control - Otto Bock Skippi Plus Instructions For Use Manual

Malfunctions/troubleshooting

8.2.2 Fault indication: Attendant control

LED indicator
Red is flashing Battery under voltage
Green is flashing Battery over voltage
Mode LED (see fig. 43, item 4)
Red is flashing 1 x Controller fault
Hand control device
Red is flashing 2 x
fault
Red is flashing 3 x Communication error
Red is flashing 4 x Joystick warning
92 Ottobock
|
Warning/fault
Battery deep discharge
Voltage too high (after full charge and
driving downhill)
Defective controller
Defective joystick
Faulty connection between the hand
control device and controller;
Defective cabling, software or hard-
ware
Joystick is not in the home position
when the unit is turned on
Cause
Charge as soon as possible
Continue driving slowly
Contact specialist dealer
Contact specialist dealer
Check cabling / plug connection;
Contact specialist dealer
Move the joystick to the home
position before turning the unit on
Possible corrective action
Skippi Plus