Control Panel - Otto Bock Skippi Plus Instructions For Use Manual

Operation
Fig. 19 Adapting the armrests to the forearm length

6.1.4 Control panel

CAUTION
Risk of accidents and injury due to uncontrolled move-
ments of the wheelchair. Turn the power wheelchair con-
trol unit off before mounting or removing the control panel
or changing its position.
NOTICE
Cable damage. Positioning the cable incorrectly can lead to
pinching and thus damage to the cable. The cable must not
be too tight or too loose. Avoid bending or crushing the cable.
44 Ottobock
|
Removing the control panel
The control panel can be removed simply by pulling on it
(fig. 20).
For a swing-away control panel (see section 7.7.1), the con-
trol panel is removed from the control panel bracket ball
coupling (fig. 21).
Fig. 20 Removing the control panel
Skippi Plus