Restrictions For Use - Otto Bock Skippi Plus Instructions For Use Manual

Placement of the restraint lap belt
1. Pull each end of the restraint lap belt from the inner side
of the seat through to the outside.
2. Hook the end of the restraint lap belt onto the pin
(fig. 5 d).
Fig. 5 d Restraint lap belt hooked onto pin
Skippi Plus

5.1.3 Restrictions for use

WARNING
Risk of accidents and injury due to using the product
with certain settings and/or installed options.
„ Before using the product as a seat in a vehicle for
transporting persons with reduced mobility, remove op-
tions that need to be taken off for safe transportation.
Please observe the following table.
„ Stow all dismantled components securely in the wheel-
chair accessible vehicle.
„ Please note that certain settings on the product exclude
the use of the product in a vehicle for transporting per-
sons with reduced mobility.
Transportation and storage
Ottobock | 33